D-Link DFE-530TX+ - Manual (Page 17)

DFE-53OTX Ethernet/Fast Ethernet Adapter for PC/ Bus
Connecting for 1OMbps Ethernet
Category 3, Category 4, and Category 5 UTP cable, as well
as EIA/TIA-568 100-ohm STP cable, all qualify under
Ethernet cabling rules. The maximum cable run between
the DFE-530TX and the supporting hub is 100 meters. The
cable must be straight (not a
crossover
cable) with RJ-45
connector at each end. Make the network connection by
plugging one end of the cable into the RJ-45 jack of the
DFE-530TX, and the other end into a port of the supporting
hub.
Software Installation
On account of the great variety of network environments
for which the DFE-530TX may be used, and revisions of
those network systems, the instructions for software
installation are given as README files on the DFE-530TX
Software Diskette. Review the root directory README for
overview information, and for full installation details, see
the README and referenced instruction files in the sub-
directory appropriate to your network operating system.
1 0 installation