ETA Promise User Manual

Page 21

III. PREPARATION FOR USE

Remove all packing items and unpack the mixer and its accessories. Remove all possible

adhesion foils, stick-on labels or paper from the appliance. Before using the appliance for

the first time, wash all parts coming in contact with the food in hot water with a suitable

detergent, rinse them thoroughly in clean water and wipe them or leave them to dry.

Use of the individual levels (A2, A3), (pic. 2)

– off

1 až 5 – speed selection (use for whisking, mixing, kneading).

MAX – the motor is running at max. power and is in operation the whole time the button

A2 is pressed (for mixing). Submersible blender G may be turned on only with this

button while the speed selector

A2 must be in position 0!

Stand (B)

Folding out the bracket - press the B2 button and fold out the bracket B1 (pic. 6). When

folding back the bracket, press the

B2 button again and the

bracket will fold back to the stand, arrest itself (a click will sound).

Removing the propulsion unit - by pressing button B3, the arrest will be released

(pic. 4) it is possible to remove the propulsion unit

A from

the fold-out bracket

B1.

Rotary bowl (D)

Place the rotary bowl in the stand

B (Fig. 7). To remove the bowl, follow the above

procedure in the reverse order

Attaching and removing the lid (C)

Put the lid onto the fold-out bracket

B1 by sliding the protrusions on the lid into the

protrusion in the fold-out bracket and pushing the lid all the way (pic. 5). Proceed reversely

when removing the container.

Feeding opening cover (C1)

Sliding the cover aside, the feeding opening can be used to add liquid or solid ingredients

in the bowl

D while the propulsion unit A is running.

Holder (H)

The holder is deigned to hold the mixer and tools. Fit the holder on the wall using the

supplied dowels and screws. Make sure that there is no electric, telephone, plumbing fitting

under the plaster at the place of mounting the holder.

IV. USING ACCESSORIES

Take please the following tips for examples and inspiration. Rather than giving instructions,

the aim is to show different ways how to process food. The processing times are never

longer than a few minutes. It is advisable to break work from time to time, switch the

appliance

OFF (the 0 setting) and clean any sticking food off the tolls or the bowl or lid (see

please

I. SAFETY WARNING).

Whipping beaters (E)

Use: to beat or whip egg whites, cream sauces, cream, pastry, puree, etc. Never use the

whipping beaters for mixing tough substances such as yeast dough.

Inserting: their reciprocal position is designated by a symbol on the bottom part of the

propulsion unit (pic. 3). Insert the whisks into respective openings

A4 in the

bottom part of the propulsion unit all the way. Release the whisks by pressing

the release button

A1 (pic. 2).

/ 38