ETA Lavado - Manual (Page 16)

Storing the appliance and accessories
After cleaning, wind the power supply cord A4 over the back part of the drive unit A. Store the drive
unit at a dry, dust-free place, out of reach of children and legally incapacitated people.
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing, components
and accessories as well as their recycling on all parts. The symbols specified on the product or in
the accompanying documentation mean that the used electrical or electronic products must not
be disposed of together with municipal waste. For proper disposal, hand them over at the special
collection places where they will be accepted free of charge. Suitable disposal of the product can help
to maintain valuable natural resources and to prevent possible negative impacts on the environment
and human health, which could be the possible consequences of improper waste disposal. Ask for
more details at the local authorities or at a collection site. Fines can be imposed for improper disposal
of this type of waste in agreement with the national regulations. If the appliance is to be put out of
operation, after disconnecting it from power supply we recommend its cutoff and in this way it will not
be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts of the
appliance must be carried out by professional service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
VIII. TECHNICAL DATA
Voltage (V) specified on the type label
Input (W) specified on the type label
Weight of drive unit (kg) about 1.0
Input in off mode is 0.00 W.
The product has received ES declaration of conformity according to Act as amended. The product
matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of the
electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements of products
in terms of their electromagnetic compatibility
The product is in conformity with the European Parliament and European Committee Regulation No.
1935/2004/ES re. Materials and objects designed for contact with food.
The manufacturer reserves the right for any insignificant deviations from the standard finished
product which do not have any effect on the functioning of the product.
NOTICE
16
GB