ETA Lavado - Manual (Page 14)

– Do not insert the appliance into any body holes.
– Do not remove the appliance if the drive unit is in operation!
– Make sure that the power supply cable does not get between the rotating parts of the accessories.
– The work adapters cannot be exchanged when the drive unit is in operation for safety reasons.
– Check before every connecting of the appliance to power supply whether the switch A1 is in the 0
position (off) and after completing work always disconnect the appliance from power supply.
– Always unplug the appliance from power supply if you leave it unattended.
– Do not let children use the appliance without supervision!
– Do not process food at temperature exceeding about 80 °C.
– Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance and the
accessories.
– If the processed food starts to stick to the appliance (e.g. whipping beaters, kneading hooks),
switch off the appliance and clean the accessories carefully using a spatula.
– Make sure that appliance does not hit walls of containers strongly when handling the beater.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into
water or bent over sharp edges.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid
standards.
– Never use the appliance for any other purpose than for that described in these instructions for use!
– The manufacturer is not responsible for damage caused by improper use of the appliance and the
accessories (e.g. food deterioration, fire) and its guarantee for the appliance does not apply in
situations when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (fig. 1)
A – drive unit
A1 – Multi–function control A3 – holes of the drive for connecting the accessories
A2 – TURBO button A4 – power cord
B – whipping beaters
C – kneading hooks
III. PREPARATION FOR USE
Remove all the packing material and take out the beater with the accessories. Remove all possible
adhesion foils, stick–on labels or paper from the appliance. Before the first use, wash the parts that will
be in contact with food in hot water with a detergent, rinse them thoroughly with clean water and wipe
till dry, or let them dry. Plug the power cord connector A4 to an electric socket.
Using individual levels (A1, A2), (fig. 3)
0 – off,
1 to 3 – speed options (using for whipping, mixing, kneading),
EJECT – ejector (releases the accessories from the drive unit),
TURBO button – the motor works at maximum performance and it is in operation while the button
A2 is pushed,
– can be used at any speed level.
IV. USE OF THE ACCESSORIES (Fig. 2)
Please consider the following tips for preparing food as examples and inspiration, the purpose of
which is not to provide instructions, but to show various possibilities of preparing food. The times of
food preparation (processing) are given in minutes. We recommend stopping work from time to time,
switching off the appliance (position 0) and removing possible food that was stuck on the accessories
B, C or on the container walls (see par. I. SAFETY WARNING). After finishing work, switch off the
beater and unplug the fork of the power supply A4 from the electric socket.
Whipping beaters (B)
Use: Whisking egg whites, mousse, creams, whipping creams, sponge cake dough/batter, mashes, etc.
14
GB