ETA Maesta - Manual (Page 30)

VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts of the appliance The
symbols specified on the product or in the accompanying documentation mean that the
used electrical or electronic products must not be disposed of together with municipal
waste. For proper disposal, hand them over at the special collection places where they will
be accepted free of charge.
Suitable disposal of the product can help to maintain valuable natural resources and to
prevent possible negative impacts on the environment and human health, which could be
the possible consequences of improper waste disposal. Ask for more details at the local
authorities or at a collection site. Fines can be imposed for improper disposal of this type
of waste in agreement with the national regulations. If the appliance is to be put out of
operation for good, after disconnecting it from power supply we recommend cutting off the
power cord and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
Problem Cause Solution
Brown liquid is
pouring out of the
ironing plate
Forbidden chemical agents have
been used to remove the limescale
or there is substantial amount of
limescale in the steam chamber
and it needs to be cleaned
Do not add any chemical agents into the
water container for removing scale
You use one of the types of water
that we do not recommend
Use only common clean drinking water for
filling in the container, or water diluted with
distilled water
Fibers from linen got into the holes
in the ironing plate and they are
burning there
Clean the iron using the SELF CLEAN
function and the steam shock, or vacuum
the cooled plate delicately from time to
time
The ironing plate
is dirty or it has
brownish colour
High temperature is set Set the temperature by the thermostat
regulator H that corresponds to the ironed
material so that the material is not burned
on the ironing plate
Laundry is not sufficiently rinsed
and it contains residues of washing
powder, softener or starch
Clean the ironing plate (see Maintenance).
The ironing
plate surface is
scratched
The plate was in contact with
sharp and hard objects while
ironing
During ironing, avoid contact with metal
objects containing sharp edges and do
not put the iron on a metal base with
sharp edges and protrusions
30
GB
/ 51