ETA Maesta - Manual (Page 27)

Sprinkling appliance (additional spray)
It is used for moistening fabrics and it is effective in ironing extremely creased fabrics.
It is activated by repeated pressing of additional spray button E. We do not recommend
applying additional spray for fine fabrics (e.g. silk and synthetic) as the used water may
stain the fabric.
Intensive steaming (steam shock)
Use only if the steam ironing is insufficient. In this case press intensive steaming button
F several times (Fig. 6A - ). Thus you will get additional steam except for the steam
created by standard steaming. If you wish to use the steam shock button, set the
thermostat regulation ring H to max. For even more intensive steam shock, set the steam
regulator D to position 0 (turn it back to your desired position afterward).
Warning
When you press intensive steaming button F several times, water may drip from the
ironing plate due to excess water in the steam chamber. Do not consider this as faulty
operation.
!
VERTICAL SYSTEM
It is intensive vertical steaming for steaming of freely hanging textiles (such as hanging
clothes, draperies, hangings). Set the regulation wheel H to the marked area for steaming
(Fig. 2). As soon as the indication lamp G1 turns OFF, stretch the fabric slightly with one
hand and move the iron vertically bottom-up (Fig. 6B - ). Press the intensive steaming
button F so that you reach vertical steam hammer. Do not hold the intensive steaming
button pressed continuously and do not use it more than 10 times consecutively.
4
5
7
8
6
27
GB
/ 51