ETA Verto User Manual

Page 22

VI. ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for production of packing,

components and accessories as well as their recycling on all parts. The symbols specified

on the product or in the accompanying documentation mean that the used electrical or

electronic products must not be disposed of together with municipal waste. For proper

disposal of the product, hand it over at special collection places where it will be received free

of charge. Suitable disposal of the product can help to maintain valuable natural resources

and to prevent possible negative impacts on the environment and human health, which

could be the possible consequences of improper waste disposal. Fines can be imposed

for improper disposal of this type of waste in agreement with the national regulations. The

appliance is equipped with the NiMh battery with long life. For environmental protection it is

necessary to remove the battery from the appliance after its service life and the battery and

the appliance must be disposed of safely using special collection networks. Ask for more

details at the local authority or at the local waste collection site.

Removal of the battery

Remove the batteries from the appliance only when they are completely discharged

(i.e. let the vacuum cleaner running until its motor stops). Screw out all bolts and open the

vacuum cleaner. Gradually disconnect the lead–in wires of batteries and remove the battery

(Fig.11).

Replacement of parts that require intervention in the electric part of the appliance

must be carried out by a specialized service! Failure to comply with the instructions

of the manufacturer will lead to expiration of the right to guarantee repair!

VII. TECHNICAL DATA

Type

ETA 0442

ETA 2442

Voltage (V)

specified on the type label of the appliance

Input (W)

specified on the type label of the appliance

Protection class appliance

II.

Battery

12V

Noise level dB (A)

AC adapter

230 V~ / 8 V

230 V~ / 16 V

6 W, 600 mA

6 W, 200 mA

The product has received ES declaration of conformity according to Act as amended.

The product matches the requirements of the below statutory order as amended.

– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of

the electrical appliance as low.

– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements

of products in terms of their electromagnetic compatibility.

The manufacturer reserves the right to make insignificant changes to the standard

make that do not affect the function.

NOTICE

22 / 34