ETA Verto User Manual

Page 21

CAUTION

– The maximum suction effect will be reached by a clean filter and an empty container.

– Do not use any aggressive washing or cleaning agents or hot water to clean the filter.

– The filter is not intended for washing in a dishwasher.

– Cleaning the filter will not restore its original colour, but it will restore its filtration

properties.

– Neglecting filter cleaning may lead to breakdown of the vacuum cleaner!

– Make sure that the binding surfaces and sealing elements are functional.

– We recommend replacing the filter twice a year or when it cannot be cleaned properly

or if it is damaged. You can buy a replacement filter in the elektro shop chain.

Filter replacement

Disassemble the movable parts of the cleaner for changing of the filter (pic. 8). Remove the

B1 filter by lightly sliding out the ring that holds the filter attached to the plastic body. Slide

the new filter on and fix it thoroughly reversely.

Storing accessories

You may put the accessory (

D, E, F) into the holder C (valid for ETA2442), or to a safe

place. Store the adaptor

G on a safe, dry and dustless place inside the house, keep it out

of reach of children and persons sui juris.

IV. MAINTENANCE

Disconnect the charger from the appliance before any maintenance. Store the vacuum

cleaner at a dry place, far enough from heat sources (e.g.

fireplace, stove, heating

element) and protect it against weather conditions (e.g. rain, sunshine). Treat the surface

of the vacuum cleaner and the charger (only when disconnected from the electric socket)

with a wet cloth, do not use abrasive and aggressive cleaning agents! You can use

a dishwasher for accessories

B, B2, E and F. Never dry plastic moldings over a heat

source (e. g.

heater, electric/gas stove).

V. TROUBLESHOOTING

Problem

Cause

Solution

Motor won‘t start

The battery is discharged Recharge the battery

The „0/I“ button is not

Press the “0/I ” button

switched on

The container

The parts of the filtration

Check / correct insertion of the protector

cannot be fixed to system not inserted

and the filter in the container

the vacuum cleaner properly in the container

The suction

Dust container full

Empty the container

performance is not Clogged filter

Clean or replace the filter

sufficient

The accessories are

Remove the blocking objects

blocked

The battery is discharged Recharge the battery

21 / 34