Technical data – ESI uniK 08 User Manual

Page 7

ESI

uniK 08

Orientation

It’s very important to place the uniK 08 vertically. Never place them horizontally.

Comments

Please also make sure to not place any obstacles that may block the flow of air or that could
generate sound reflections (especially highly reflective material including glass or metal) in front of
the monitor. Also, don’t put plants in pots on top or too close to your monitors. Keep a certain
distance to the wall behind the speaker, as it could block air flow.

4. Technical Data

Please note that technical specifications are subject to change without any prior notice. The specs
given in this manual are up-to-date at the time of the creation of this document.

Specifications

Model: uniK

Type:

Biamp 2-Way Powered speaker

System Type:

Active Studio Monitor Speaker

Dimensions (W x H x D):

252 x 352 x 319mm

Weight: 7.9

HF Driver:

Ribbon tweeter Φ49 x 26 mm

LF Driver:

8" kevlar curved cone (magnetic shielding type)

Output Power:

90W (HF: 30W, LF: 60W), 130W AC consumption power

Working Voltage:

AC100-240V 50/60Hz

Frequency Response:

37Hz – 22kHz

Input Impedance:

42kOhm (balanced) / 8.5kOhm (unbalanced)

Crossover Point:

2.4kHz

SPL:

90dB ±3dB @1W / 1M at 300. 400. 500. 600 Hz

Rated Noise Power:

45W (THD=1%, 4ohm load, 1kHz)

Input Sensitivity:

75mV@1W; 485mV@45W (1 kHz)

Input Connectors:

XLR / TS1/4" combo connector, balanced / unbalanced input

Volume Control:

min – 0dB – max

Indicator:

power LED on front panel, blue