Dodge 2010 Ram Truck - Manual (Page 77)

Multiple Child Restraint Installation Sequence
(Quad Cab
௡/Crew Cab/Mega Cab௡ - Rear Seats)
Quad Cab ௡/Mega Cab௡
1. Obtain tether straps by raising the head restraints and
reaching between the rear glass and rear seat. The tether
strap may be retained with an elastic band. Accessibility
to the tether strap is greatly improved by raising the seat
cushion to the “up” position. Remove the elastic before
use.
2. Place a child restraint on each outboard rear seat and
adjust the tether strap so that it will reach under the head
restraint to the tether anchor directly behind the seat and
then to the anchor directly behind the center rear seat.
3. Pass each tether strap hook under the head restraint
and through the loop of webbing behind the child seat.
Head Restraint Adjustment
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE