beautypg.com

Equipment identification plate – Dodge 2010 Ram Truck User Manual

Page 471

background image

WARNING!

You or others could be injured if you leave the
vehicle unattended with the transfer case in the
NEUTRAL position without first fully engaging the
parking brake. The transfer case NEUTRAL position
disengages both the front and rear driveshafts from
the powertrain and will allow the vehicle to move,
even if the transmission is in PARK. The parking
brake should always be applied when the driver is
not in the vehicle.

CAUTION!

Do not use a bumper-mounted clamp-on tow bar

on your vehicle. The bumper face bar will be
damaged.

(Continued)

CAUTION! (Continued)

Do not disconnect the rear driveshaft because

fluid will leak from the transfer case and fluid loss
will damage internal parts.

EQUIPMENT IDENTIFICATION PLATE

The equipment Identification Plate is located on the hood
inner surface.

The following information about your vehicle is dis-
played on this plate: Model, Wheelbase, Vehicle Identifi-
cation Number, Truck Order Number, and code numbers
with descriptions of all production and special equip-
ment on the truck as shipped from the factory.

NOTE:

Always refer to the Equipment Identification

Plate when ordering parts.

470

STARTING AND OPERATING