ESI Waveterminal U24 - Manual (Page 6)

6
4. Hardware Installation
Before you begin, make sure you have read your computer’s manual on
installing USB devices. Your computer’s manual should describe the
precautions you should take.
Shutting down computer wouldn’t need for installing an USB device to
the computer. However, we will take it from the start to make sure you
can follow every detail of installation.
1. Find the USB port on your computer. USB port is looked
like below. You can find it by the PS/2 or serial ports on
the back of desktop computer system.
USB port on computer
2. Plug in appropriate plug of USB cable (called Series A
plug) to the USB port of computer. You will notice that
USB ports on computer and U24 are different.
Series A plug
3. Connect the other end of the USB cable (Series B plug) to
the USB port of U24.
Series B plug