ESI U46DJ - Manual (Page 17)

U46DJ ESI
6.2. Latency setting on ASIO applications
Clicking the ASIO Control Panel button (or config) of ASIO applications will open the ASIO
latency setting of U46DJ. Keep ‘Enable Input’ should be always checked. Here you can choose
between different buffer sizes. Typically a lower latency is good when working with software
synthesizers or when you process audio signals from the audio inputs in realtime with your audio
software. A smaller latency value will however also cause more system load.
For a typical faster Pentium 4 system, 128 ~ 256 are good values. Buffer sizes 1024 and 2048 are
normally used only in special circumstances. The factory default is 512 to provide a basic level of
compatibility to different systems.
Make sure you click the Apply button after changing the settings.
17