ESI U46 XL - Manual (Page 5)

U46 XL ESI
5
2. Description of U46 XL
2.1 Front Panel
Channel 1/2 input connector (CH 1/2)
- Input source (MIC/LINE) selector: This is where you select input sources of channel 1/2.
- MIC IN connector: Connect your microphone to this XLR connector.
- +48V phantom power switch: Supply +48V DC phantom power to input channels 1/2 by
pressing the button.
- GAIN control for microphone input: Control input level of microphone.
Channel 3/4 input connector (CH 3/4)
- Input source (HI-Z/LINE) selector: This is where you select input sources of channel 3/4.
- HI-Z IN connector: Connect an electric guitar or bass guitar to this unbalanced 1/4” connector.
Only unbalanced 1/4” phone jack connection is possible via this input.
- GAIN control for Hi-Z input: Control the input level of a connected electric guitar via this
control knob.
Headphone output with volume control (HEADPHONE): Monitor all input sources and output
sources through the headphone output. The output level can be adjusted with the control knob.
POWER switch: Allows you to turn on / off the unit.