Description of u46 se, 1 front panel – ESI U46 SE User Manual
Page 5

U46 SE
ESI
2. Description of U46 SE
2.1 Front Panel
(1) Channel 1/2 input connector (CH 1/2)
- Input source (MIC/LINE) selector: This is where you select input sources of channel 1/2.
- MIC IN connector: Connect your microphone to this balanced 1/4” connector.
- +48V phantom power switch: Supply +48V DC phantom power to input channels 1/2 by
pressing the button.
- GAIN control for microphone input: Control input level of microphone.
(2) Channel 3/4 input connector (CH 3/4)
- Input source (Hi-Z/LINE) selector: This is where you select input sources of channel 3/4.
- HI-Z IN connector: Connect an electric guitar or bass guitar to this unbalanced 1/4” connector.
Only unbalanced 1/4” phone jack connection is possible via this input.
- GAIN control for Hi-Z input: Control the input level of a connected electric guitar via this
control knob.
(3) Headphone output (HP OUT) with Headphone volume control: Monitor all input sources
and output sources through the headphone output. The output level can be adjusted with the
control knob.
(4) Power switch: Allows you to turn on / off the unit.
5