ESI WaMi Rack 192L - Manual (Page 41)

ESI WaMi Rack 192 Series
42
7. Specifications
1. Analog Input Specification
1) Type : 4 channel analog line input - 1/4" TRS Phone jack (X4)
- Balanced XLR Connector (X4)
2) Level : +4dBu balanced, +4dBu Nominal, +22.5dBu Max (Gain +0dB)
3) Gain Adjustment : +0dB ~ +20dB
4) Impedance : 10K ohm
2. Analog Output Specification
1) Type : 8 Channel analog line output - 1/4" TRS Phone jack (X8)
- Balanced XLR Connector (X2)
2) Level : +4dBu balanced, +4dBu Nominal, +22.5dBu Max
3) Attenuation
: Digital -127dB ~ 0dB, 0.5dB Step Size (with Mute)
4) Impedance : 100 ohm
3. Mic preamplifier Specification
1) Sensitive : 66.5mV max (Gain +0dB)
2) Gain Adjustment : +20dB ~ +40dB
3) Impedance : 1.5K ohm
4) +48V Pantom power
4. Headphone Amplifier Specification
1) Output Power : 60mW Max
2) Dynamic Range : 110dB (Typical)
3) S/(N+D) Ratio : 101dB, 0.03% (Typical)
5. Sample rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
6. A/D Convertor Specification
1) Type : 24bit, 192KHz, 128X Oversampling (Full Differential Input)
2) Dynamic Range : 123dB (@ -60dBFS with A-Weighted)
3) S/(N+D) Ratio : 105dB (@ -1dBFS, measurement method)
4) Frequency Response : 6.5 ~ 21.768KHz, +/- 0.001dB (@ fs=48KHz)
6.5 ~ 43.536KHz, +/- 0.003dB (@ fs=96KHz)
6.5 ~ 87.072KHz, +/- 0.007dB (@ fs=192KHz)
5) Interchannel Isolation : 120dB
6) Interchannel Gain Mismatch : 0.1dB
7. D/A Convertor Specification
1) Type : 24bit, 192KHz, 128X Oversampling, 8times Digital filter
2) Dynamic Range : 106dB (@ -60dBFS with A-Weighted)
3) S/(N+D) Ratio : 90dB (@ -1dBFS, measurement method)
4) Frequency Respons : 0 ~ 21.768KHz, +/- 0.05dB (@ fs=48KHz)
0 ~ 43.536KHz, +/- 0.05dB (@ fs=96KHz)
0 ~ 87.072KHz, +/- 0.05dB (@ fs=192KHz)
5) Interchannel Isolation : 100dB
6) Interchannel Gain Mismatch : 0.2dB
8. Digital I/O Specification
1) Type : Coaxial I/O Connector
2) Format : IEC-958 Consumer(S/PDIF),IEC-958 Professional(AES/EBU)
3) Sample Rate : 32,44.1,48,88.2,96,176.4,192 KHz
4) Resolution : 24 Bits