ESI Juli@ XTe - Manual (Page 21)

ESI Juli@ XTe
21
can listen to the signal via the analog output in real-time. The monitoring level can be set using the
mouse, mouse wheel, or cursor keys.
MASTER FADER
Allows you to change the level of the final output signal. The level can be set using the mouse,
mouse wheel, or cursor keys.
MUTE
Select this button to mute each signal source.
Sample Rate and Clock
Sample Rate
Selects the sample rate for Juli@ XTe. The green lit will indicate current sample rate. Juli@ XTe
supports 44.1, 48, 88.2, 96, 176.4, 192 (kHz) as sample rates. Select ‘AUTO’ to match the sample
rate of the played audio source automatically (a red light shows that AUTO is on). Deselecting Auto
mode allows you to set the sample rate manually (red light AUTO is off). This selection might not