ESI GigaStation - Manual (Page 11)

10
To install the GIGAStation card in your computer:
1. Turn off your computer. Leave it plugged in so that it is grounded.
2. Open the computer case. Remove the screw and the rear slot cover of an available PCI
expansion slot in your computer.
3. Discharge any static electricity that may be on your clothes or body by touching a
grounded metal surface such as the power supply case inside the computer.
4. Remove the card from its anti-static bag.
5. Push the card firmly but gently into the PCI slot until the card’s connector clicks into
place. Make sure that the audio connectors at the end of the card go through the rear slot of
the computer.
6. Attach the rear bracket of the card to the computer, using the screw from the rear slot
cover.