Specifications – ESI ESP1010 User Manual

Page 29

ESP1010

11. Specifications

1. Analog Inputs

1) Connector Type:

1/4" female TRS-type, balanced or unbalanced (ch 1~8)

2) Peak level:

0dBFS @ +6.5dBV (-10dBV nominal)

3) Impedance:

10k ohms minimum

4) Att. & Gain Control:

-60dB ~ +15dB (0.5dB step size) *ch1, 2ch only

2. Analog Ouputs

1) Connector Type:

1/4" female TS-type, unbalanced (ch 1~8)

2) Peak level:

+6.2dBV @ 0dBFS (-10dBV nominal)

3) Impedance:

100 ohms

4) Attenuation Control:

-60dB ~ 0dB (0.5dB step size)

3. Mic Preamplifier

1) Peak level:

0dBFS @ -40dBV

2) Gain Adjustment:

Gain +31dB up + -60 ~ +15dB (0.5dB step size)

3) +12V phantom power supply from PCI Card

+48V phantom power supply from RACK (XLR connector only)

4. Headphone Amplifier

1) Load Impedance Range: 32-300 ohm (for the best performance)

2) Output Power:

125mW @ 32ohm per channel

- 29 -