Entone Kamai 400 User Manual
Page 15
Kamai Hybrid TV Receiver User’s Guide
13
Copyright
2011 Entone, Inc. All rights reserved.
CONNECTING TO THE TV USING COAXIAL CABLE (CABLE NOT PROVIDED)
1.
Use the coaxial cable to connect your TV’s antenna input to the Kamai’s “TV OUT” connector.
2.
Tune your TV to channel 3 (i.e. 61.25MHz)
NOTE:
Coaxial cable is not included in the package and has to be purchased separately.
Figure 4-1 Connecting TV using Coaxial Cable