Entone Kamai 400 User Manual
Page 11
Kamai Hybrid TV Receiver User’s Guide
9
Copyright
2011 Entone, Inc. All rights reserved.
FRONT PANEL AND REAR PANEL
Figure 2-1 Kamai Front Panel
Part Name
Description
1.
Factory Reset
Reset the device factory settings with a thin metal probe
2.
USB
USB 2.0 port (max 500mA load)
3.
POWER Indicator
Blue when Kamai is powered on
4.
LINK Indicator
Green when Ethernet connection is active
5.
HD Indicator
Blue when the video resolution is HD (720p or higher)
6.
REC Indicator
Red when DVR (Digital Video Recording) is recording
Figure 2-2 Kamai Rear Panel
Part Name
Description
1.
CBL/ANT IN
Cable / Antenna IN: IEC/F connector to cable / antenna source (tuner is optional item)
2.
TV OUT
F Connector (Male) to TV coaxial connector or home coaxial network
3.
HDMI
HDMI output
4.
VIDEO
Composite video output
5.
AUDIO
Stereo Audio output
6.
ETHERNET
RJ45 plug for connecting to ADSL modem or network access equipment
7.
DIG AUDIO
Digital Audio: S/PDIF digital audio output
8.
DC
DC power jack