EM Acoustics MSE-159SP self-powered fullrange loudspeaker - Manual (Page 14)

Page 14 of 25
MSE-159SP User Manual
v1.0 May 2012
5.0 – Mounting & Rigging Options
5.1 - System Overview
The flying system for the MSE-159SP has been specifically designed to be flexible, intuitive
and reliable. Please read this section of the user manual extremely carefully as the
rigging of loudspeakers is a very serious matter with potentially fatal consequences should
anything go wrong. If you are in ANY DOUBT WHATSOEVER, contact a reputable
rigging company or your local EM Acoustics representative.
IMPORTANT SAFETY CONSIDERATIONS
The MSE-159SP rigging hardware & accessories have been designed and constructed to a
very high standard of safety, and tested to demanding specifications. To ensure the
highest standards of safety, the following information on array assembly must be exactly
followed and understood.
Only use EM Acoustics recommended rigging hardware and accessories, which are
specifically designed for the purpose. Do not use MSE-159SP flying hardware for any
other loudspeaker system – the components are specifically designed to work with the
MSE-159SP and are not interchangeable with any other EM Acoustics loudspeaker product
or any other loudspeaker system. The use of MSE-159SP flying hardware with other
manufacturers’ systems may compromise the safety standards and EM Acoustics, and its
parent company, are in no way liable for any loss, damage or injury caused by such
practice.
Do not modify or alter the MSE-159SP hardware or accessories, nor use them in any way
other than that described in this manual. Rigging components supplied as part of the
MSE-159SP system are in no way interchangeable and should not be used as such.
The component parts of the MSE-159SP rigging assembly should only be assembled in the
manner described in this manual, using the fasteners and fixings stated herein. The use
of fasteners and methods of assembly not described in this manual may result in an
unsafe assembly and as such EM Acoustics will not be responsible for any loss, damage or
injury caused by such practice. Welding, drilling or any other means of modifying any part
of the flying hardware or permanently fixing components to each other is strictly
forbidden.
Rigging assemblies must only be assembled using the appropriate parts and fixings as
described in this manual, explicitly following the assembly instructions given herein.
Rigging components must only be fixed to EM Acoustics MSE-159SP system components,
using the correct cabinet location points, assembly methods and fasteners specifically
described within this manual.