EM Acoustics MSE-159SP self-powered fullrange loudspeaker - Manual (Page 11)

Page 11 of 25
MSE-159SP User Manual
v1.0 May 2012
4.0 – Amplification and Audio
The MSE-159SP includes a highly advanced 64-bit DSP processing card to handle high
pass filters, gain and delay settings, which are accessed by means of preset programs that
are factory installed into the unit. This DSP card feeds a Class-D amplifier package (single
channel) providing ample power to drive your loudspeakers to their full potential. The
amplifier and DSP combination also provides full limiting and remote monitoring.
4.1 - Audio Inputs
The loudspeakers are supplied with female XLR input connectors, and male XLR link
output connectors. Both of these connectors are wired pin 1 screen, pin 2 positive, pin 3
negative. The MSE-159SP loudspeakers can accept both analog and digital AES/EBU
inputs. The factory default setting is analog – see later in this manual for details on
selecting digital input.