ELICA SEAGULL - Manual (Page 39)

en
39
Operating Instructions
General method of operation
With its efficient all-round extraction, the
innovative Seagull rim ventilator offers
excellent extraction over the hob used.
The hood’s body extends from the worktop
upwards and comes to rest right over the
centre of the hob. The sophisticated de-
sign means that the actual hood body is
very slim and hardly noticeable. The metal
filters are fitted inside the hood body and
concealed by a stainless steel plate. They
are easy to replace and can be replaced
without any tools. The hood body is moved
up and down by a motor. The extraction
capacity is controlled via the control panel
which is fitted to the side of the hood’s
arm. For reasons of hygiene, the Seagull
all-round extractor hood is made from
stainless steel.
Product description
1
Hood body (extended)
2
Control panel
3
Lighting (LED)
4
Stainless steel plate with metal
filters fitted behind it
5
Cover panel
Operating instructions
The extractor hood and fan motor’s out-
put can be controlled as follows at the
control unit:
3
4
2
1
5
T1
T2
T3
L1
Operating the hood/fan motor
from the operating panel
Extending – retracting the hood T1
To extend the hood press T1.
Pressing T1 again will make the hood re-
tract.
Fan output T2
The fan output can be controlled by press-
ing T2.
When the hood is retracted:
Press T2 1x = Fan setting 1
L1 green LED illuminates.
Press T2 2x = Fan setting 2
L1 cyan LED illuminates
.