Echo Bear Cat 75111 - Manual (Page 23)

Page 17 Bear Vac Pro Operator’s Manual
Service & Maintenance
GREASING
Fig. #23, Grease every 25 hours
Fig. #22, Grease every 25 hours
Fig. #21, Grease every 25 hours
There are four grease zerks on the Bear Vac Pro. Three are
located on the castor wheel weldment, and one on the
beaterbar belt. The pictures below show the exact locations
of the zerks. They should be greased every 25 hours,
depending upon conditions.
Fig. #24, Grease every 25 hours