Echo Bear Cat 75111 - Manual (Page 19)

Page 13 Bear Vac Pro Operator’s Manual
Section
5 Service & Maintenance
To prevent personal injury or property damage: Shut
off engine, disconnect spark plug wire, and make sure
that all moving parts have come to a complete stop
before, servicing, adjusting or repairing.
WARNING
MAINTENANCE SCHEDULE
The following items listed in the service and maintenance
schedule are to be checked, and if necessary, corrective
action should be taken. This schedule is designed for units
operating under normal conditions. If the unit is operating in
adverse or severe usage conditions it may be necessary for
the items to checked and serviced more frequently.
See engine owners manual for further maintenance and
troubleshooting information.
NOTE:
After using the Bear Vac Pro for three hours the beaterbar
and transaxle engagment may need to be adjusted. The
handlebar levers, when cycled, should engage fully and re-
lease completely, otherwise they need to be adjusted. For
adjustment locations see Fig. # 15 and #16.
SERVICE AND MAINTENANCE SCHEDULE
FREQUENCY
COMPONENT
MAINTENANCE
REQUIRED
Refer to Engine
Operator manual
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
FUEL TANK FILL
•
AIR CLEANER CHECK AND CLEAN¹
•
AIR INTAKE CLEAN¹
•
ENGINE OIL CHANGE¹
•
ENGINE OIL CHECK
•
FUEL FILTER REPLACE
•
SPARK PLUG
CHECK CONDTION AND
GAP
•
NUTS AND BOLTS CHECK
•
BELT CONDITION CHECK
•
BELT TENSION CHECK
•
GREASE ZERKS LUBE
•
ENTIRE MACHINE CLEAN
•
¹ PERFORM MORE FREQUENTLY UNDER EXTREMELY DUSTY CONDITIONS.
Fig. #15, Adjusting transaxle engagement
Fig. #16, Adjusting beaterbar engagement