Echo Bear Cat 75360 2002 - Manual (Page 13)

Page 7 Bear Vac Operator’s Manual
Features & Controls
USE OF CONTROLS
Model # 75050, 75060.
1. Engine Throttle: Changes engine
speed, turns the engine on and off,
and places the engine in choke on
the Honda engines. On Briggs
models the choke is not located
on the throttle (See Briggs owners
manual).
2. Height adjustment control: The
Bear Vac nozzle height is adjust-
able. Adjust the height as needed
to optimize vacuuming perfor-
mance.
3. Recoil start: Bear Vacs are all
equipped with a recoil starter. To
start the engine with the recoil
starter follow starting instruction in
the operation section of the manual.
WARNING
To prevent personal injury or prop-
erty damage: Shut off engine, dis-
connect spark plug wire, and make
sure that all moving parts have come
to a complete stop, before servic-
ing, adjusting or repairing.
Model # 75350, 75360.
1. Engine Throttle: Changes engine
speed, turns the engine on and off,
and places the engine in choke on
the Honda engines. On Briggs
models the choke and is not lo-
cated on the throttle (See Briggs
owners manual).
2. Height adjustment control: The Bear
Vac nozzle height is adjustable. Ad-
just the height as needed to opti-
mize vacuuming performance.
3. Transmission shift control: This
control shifts the self-propelled
transmission between three gears.
Do not shift the machine with the
transmission turning.
WARNING
To prevent personal injury or prop-
erty damage: Shut off engine, dis-
connect spark plug wire, and make
sure that all moving parts have come
to a complete stop, before servic-
ing, adjusting or repairing.
Fig. #4, Throttle Fig. # 5, Height adjustment control
4. Clutch bail: This control engages
the transmission to drive the Bear
Vac forward. Release the bail when
shifting the transmission.
3. Recoil start: Bear Vacs are all
equipped with a recoil starter. To
start the engine with the recoil
starter follow starting instruction in
the operation section of the manual.