Echo Bear Cat 70580S - Manual (Page 7)

4
S
E C T I O N
1
Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is damaged or
unreadable. For location of safety decals on the chipper frame, see parts drawings and lists in section 4.
NOTE: For engine safety and instruction decals, see engine owner's manual or contact the engine manufacturer.
1.2 Safety Decals
Panel 1 - Attention
Panel 2 - Read and become familiar with the Owner's manual before operating the machine.
Panel 3 - Wear proper eye and ear protection while operating this machine
Panel 4 - Stop machine and allow all parts to come to a complete stop before cleaning, making
adjustments or servicing machine.
Panel 5 and 6 - Stop engine and remove spark plug wire or key before cleaning, making adjustments
or servicing machine.
Raise lever slowly to engage chipper/shredder clutch after
engine is running. Push lever down to disengage clutch. Keep hands and feet out of the inlet and discharge
openings while machine is operating to avoid injury.
Do not put material larger than 3/4 inch (19 mm) in diameter
into machine shredder