Echo Bear Cat SC2206 - Manual (Page 9)

2.75 INCH CHIPPER/SHREDDER 5
ENGLI
sH
section
5/16” Flange Nut
3/4” Carriage Bolt
5/16” Flat Washer
5/16” Fender
Washer
3/4” Hex Bolt
1/2” Carriage Bolt
5/8” Carriage Bolt
DESCRIPTION QTY. DESCRIPTION QTY.
5/8” Flat Washer
3
3
2
30
5/8” Pushnut
3
24
6
3
3
5/16” Nylock Nut 6
[NOTE: EUROPEAN MODELS HAVE TWO EXTRA 5/16” NUTS AND
WASHERS AND TWO 3-1/2” HEX BOLTS. THREAD THESE BOLTS
THROUGH THE HOLES IN THE CHIPPER CHUTE OPENING AND SECURE
WITH THE WASHERS AND NUTS AS AN EXTRA SAFETY MEASURE.]
2 AssEmbLY
2.2 ATTAcH HITcH ANd sTANd
attach the hitch to the stand with two (2) 5/8" carriage 1.
bolts and flange nuts.
attach the stand to the chipper body with four (4) 5/8"
2.
carriage bolts and flange nuts.
2.3 ATTAcH WHEELs ANd AxLE
HITCH
STAND
Attach wheels to the axle with two (2) flat washers and
pushnuts. bolt the axle on to the chipper body with four
(4) 1/2" carriage bolts and flange nuts.
2.1 IdENTIFY LoosE HARdWARE
identify the loose hardware in the owner's kit using the guide below. all hardware is shown to scale.
tools nEEDED: 1/2" wrench, 1/2" socket, ratchet.
AXLE
WASHER
WHEEL
PUSHNUT