Specifications – DR Power Lawn Aerator User Manual

Page 7

Specifications

Except for the Handlebar Assembly, your DR Lawn Aerator comes fully assembled.

Installing the Handlebar Assembly onto the Aerator Frame

Tools and Supplies Needed:



Two 7/16" Wrenches

Cut the plastic wrap from around the Bail Bar Spring with a Utility Knife so
you can access the Spring (Figure 2).

Disconnect the Bail Bar Spring from the Bail Bar Bracket.

Cut the Cable Tie on the Tine Position Lever and rotate the Lever in towards
the machine.

Engine

Briggs and Stratton Manual-Start

Briggs and Stratton Electric-Start

Please refer to the Engine Operator’s Manual
for Engine-specifications.

Gearbox

Direct Engine Mount

Ratio

6:1 Reduction

Shaft

.75" Diameter

Output Drive

V-Belt to Tine Crankshaft

Self-Propel

Automatic by Tine Engagement Action

Speed

2.5 MPH

Aerator Tines

Cam Drive Action

Crankshaft and Rods

Heavy Duty Cast Iron

Core-Punch End

Hardened Steel, Replaceable

Number Of Tines

Core Spacing

Core Depth

Up to 2.75"

Frame Construction

.11" Thick Welded Steel

Handlebars

1" Dia. x .12" Thick Steel Tubing w/ Foam Grip

Wheels

10" Dia., Steel w/ Bearings, Rubber Tread

Tine Engage

Operator Presence Bail Bar

Tine Position

Lever to Raise Tines for Transport/Storage

Machine Weight

180 Lbs.

196 Lbs.

Machine Dimensions

63.7" L x 21.7" W x 38.5" H

Shipping Weight

232 Lbs.

248 Lbs.

Shipping Dimensions

54.75" L x 35.5" W x 45.25" H

Figure 2

Wrapped
Bail Bar
Spring

Bail Bar
Bracket

Bail Bar
Spring

Cable Tie

Tine
Position
Lever