DR Power Hydraulic 4-Ton (January 2008 - Present) - Manual (Page 23)

www.DRPower.com or call 1-800-DR-OWNER 19
CHAPTER 5
MAINTAINING THE 4-TON ELECTRIC/HYDRAULIC DR
WOOD SPLITTER
This chapter covers regular maintenance procedures that will ensure the best performance and long life of
your 4-TON ELECTRIC/HYDRAULIC DR WOOD SPLITTER.
•
BEFORE PERFORMING ANY MAINTENANCE, YOU MUST UNPLUG THE WOOD SPLITTER FROM THE
POWER SOURCE.
•
MAKE SURE THE HYDRAULIC SYSTEM IS DEPRESSURIZED (SEE PAGE 7), AND MAKE SURE THE FLUID
HAS COOLED. READ THE "GENERAL SAFETY RULES" (CHAPTER 2) OF THIS MANUAL BEFORE
PERFORMING ANY REPAIRS OR MAINTENANCE.
Regular Maintenance Checklist before each use
•
Clean the log Ram and Guides.
•
Check the Splitting Wedge for sharpness (page 20).
•
Check the general condition of the Wood Splitter (e.g. nuts, bolts, welds, etc).
•
Check the Ram for smooth travel.
•
Check the condition of the electrical cord.
Before each season
•
Check the hydraulic fluid level (page 20). Use AW32 hydraulic fluid for operation from 40°F to
105°F and Dexron
®
Automatic Transmission Fluid for operation from -20°F to 40°F.
NEVER DRAIN THE HYDRAULIC FLUID. JUST ADD ENOUGH TO REPLENISH THE LOST VOLUME.