DR Power Tow-Behind Extra Hose Kit (September 2014 - Present) - Manual (Page 2)

7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2014 Country Home Products, Inc. All rights reserved 352001
7. Cut the Hose to the length required using Wire Cutters to cut the black
plastic spiral and then cut the clear Hose with the razor knife (Figure 5).
Note: Make sure you trace the area to cut around the Hose first to ensure you will
cut in the proper direction to end up on either side of the cut spiral.
8. Secure the end of the Extended Hose Kit to the Cuff with the Hose Clamp
using a 5/16" Wrench or Flat Head Screwdriver (Figure 6).
9. Tighten the Thumb Screw Clamp of the Cuff to secure the Cuff to the Deck
Adapter.
Refer to your DR Leaf and Lawn Vacuum Safety and Operation Instructions
manual for detailed hookup and operation of your machine.
If you have any questions please contact us at www.DRpower.com or call 1-800-
DR-OWNER (376-9637) for assistance.
Wire Cutter
Cut Point
(black Rib)
Knife Cut Line
(clear plastic)
Wire Cutters
Figure 5
Deck Adapter
Figure 6
Hose Clamp
Extra
Hose Kit
Thumb Screw
Clamp