DR Power Tow-Behind All Terrain User Manual

Page 9

Fill the fuel tank outdoors or in a well-ventilated area, away from sparks, open
flames, pilot lights, heat, and other ignition sources.

1. Place the machine on a level surface and adjust the Tow Hitch as needed so

the Frame and Engine are level.

2. Initially add 1/2 of the SAE 30 High Detergent oil into the Oil Fill (Figure 8)

and wait one minute for the oil to settle.

3. Check the Dipstick and continue adding a few ounces of oil at a time,

rechecking the Dipstick until the oil reaches the fill mark. Be careful not to
overfill.

4. Fill the Fuel Tank with fresh, unleaded gas (with a minimum of 87 Octane),

to not more than 1/4" from the bottom of the Fill Neck to allow for Fuel
expansion. Be careful not to overfill and reinstall the Cap before starting the
Engine. See your Engine Owner’s Manual for more information.

Note: To refill the Fuel Tank, turn the Engine OFF, and let the Engine cool at least

two minutes before removing the Fuel Fill Cap.

Oil Fill

Figure 8

Gas Fill