DR Power Walk-behind 8 - 15 HP (1998 - 2001) - Manual (Page 16)

12 DR
®
FIELD and BRUSH MOWER Safety & Operating Instructions
· The mower spindle (Figure 10) should
have 3-4 pumps every 100 operating
hours.
Note: Over greasing will cause grease
to leak out of the seals onto the mower
drive belt. Unless instructed otherwise,
pump only until you feel slight
resistance (1-2 pumps).
2. The following areas should be lubricated with FLUID FILM
®
or comparable lubricant every 10 to
20 operating hours—more often if the machine is operated in extremely dusty conditions:
· The differential fork at both ends (Figure 11).
· The axle above the hub where the spring is (Figure 11).
· The drive chain and the chain adjuster slide plate (Figure 12).
Figure 10
Figure 11 Figure 12