Lubrication – DR Power Walk-behind 13 - 17 HP (April 2005 - August 2005) User Manual

Page 27



ALL-TERRAIN



FIELD and BRUSH MOWER Safety & Operating Instructions

Lubrication

Your DR ALL-TERRAIN

FIELD and BRUSH

MOWER was greased at the Factory.

The operator needs to lubricate the Wheel Clutch Cable, Brake Cable, Belt Idler Arm
and the Drive Chain, periodically.

Tools & Supplies Needed:

■

Flexible hose grease gun

■

Lithium grease

■

1/2" wrench or socket (chain cover)

■

FLUID FILM

or comparable lubricant

Lubricate the Parking Brake cable and Wheel Drive Clutch cable with FLUID FILM

comparable lubricant. Spray the lubricant into the cable housing while working the cable
back and forth and few times. This should be done at both ends of the cables (Figure 10).
Perform this lubrication more often in dry and dusty environments.

WARNING! Before performing any maintenance procedure, stop the

engine and disconnect the spark plug wire(s).

Figure 10

Lubricate

Brake Cable

Clutch Cable

This manual is related to the following products:

Walk-behind 13 - 17 HP (February 2003 - March 2005)