DR Power 46 Lawn Mower Deck - Manual (Page 16)

12 DR 46" LAWN MOWER DECK Safety & Operating Instructions
6. Remove the 5/16" x 2" Cap Screw from the Pivot Tube (Figure 8).
7. Push the deck back toward the engine to create slack on the belt. Then pull the belt
forward and drop it down off the blade clutch pulley (Figure 9).
8. Twist the other end of the belt and drop it off the 3" engine pulley. You may need to
move the power unit forward or back a little so the belt doesn't hit the bolts on the
differential.
9. Remove the belt.
10. Remove the Deck Support Bracket (Figure 10).
11. Carefully pull the power unit away from the Brush Deck.
Note: You should block up the Brush Deck when pulling the power unit back for ease of
removal and to prevent the deck from falling.
Figure 8 Figure 9
Figure 10