Please register your dasdec ii – Digital Alert Systems DASDEC-II QUICK START UP GUIDE User Manual
Page 3

Quick Start Guide for Your DASDEC II
Page 3 of 40
Please Register Your DASDEC II
To verify that you have the latest version of software in your DASDEC II it’s important to register
your device with Digital Alert Systems. To register go to
www.digitalalertsystems.com
and on the
left side menu click Product Registration and Software Updates. Click on the DASDEC
Registration link and submit your information. You will be notified by Email of the latest updates
and enhancements that can be downloaded from our website.
What comes with your DASDEC II
A CD that has the full version of the Manual, Application notes, and a Product Data Sheet.
Getting Started
You will need the following before starting the setup.
County name for the location where the equipment will be installed. And county names for the area you are
broadcasting to. These county names will be converted to FIPS Code(s) in the DASDEC II.
Radio frequencies for your LP1 and LP2. These are the approved radio stations for your area and can be obtained through
your EAS chairman for your state. If a NOAA station will be monitored that must also be obtained.
IP address for the DASDEC II. This must be obtained from your system administrator to make sure there are no other
devices on your network with this address.