Digital Alert Systems DASDEC-II QUICK START UP GUIDE - Manual (Page 11)

Quick Start Guide for Your DASDEC II
Page 11 of 40
Using 3 Internal radios and a 4
th
External input
1. Use the following connections:
Then from the Setup > Audio > Decoder Audio tab select the following:
Radio 1 Radio 2 Radio 3
Internal/radio
Internal A
Here you can see the rear connection. It is on the green terminal
strip pins labeled “AUDIO IN.
Input 4 is the last
two pins on the
terminal strip.
(The L+/- & R+/-
are for program
audio)