Digi-Star EZ 2000/V - Manual (Page 9)

Digi-Star Model EZ2000/EZ2000V 2. System operation
7
TO START THE MIXER TIMER
Press the key to assign the TIMER operation
to the FUNCTION key.
Then press the key to see the Mix Time
currently set.
While the Mix Time is displayed and a number is
flashing, the FUNCTION and SELECT keys can
be used to change the displayed value.
The SELECT key ( ) increments the “flashing”
digit and the FUNCTION key ( ) selects which
digit of the display is flashing.
Now press the key. Once the correct time has
been entered or if the time displayed is acceptable,
pressing
stores the time and starts the Mix
Timer.
The display now reads HOURS, MINUTES and
SECONDS (HH:MM:SS), separated by colons that
flash every second.
The Mix Timer “counts downward” until 00:00:00
time is displayed. At this time, the alarms are
activated and the display begins flashing. This
continues until the Mix Timer Alarm is cleared
TO CLEAR THE MIX TIMER ALARM
Press the key or the key. The scale clears
the Mix Timer alarms and enters the weighing
mode.
TO RESTART THE MIX TIMER
Press the key followed by the key to start
the Mix Timer using the time previously entered.
00:05:00
9850
or
9850
1
2
3
1
1
1
2