Digi-Star AGCO - White 8816 - Manual (Page 5)

Scale Bracket and Load Cell Mounting Installation
D3879-US – Rev B AGCO – White – 8800/8500 Series 3
1. Assemble the bottom support bracket weldment to the three load cells with 3/4 x 3.25” fine thread bolt
and 3/4” jam nut. Slide a 3/4” flat washer onto 3/4” x 3.25” bolt and insert bolt from the bottom side for
all three load cells. Tighten the 3/4” bolt until the load cell is drawn tight against the 1/4" shim plate.
Next apply Loctite thread adhesive to 3/4" jam nut and tighten. IMPORTANT : Orientate the load cell
so the load cell decal arrow is pointing upward. Make sure the 1/4" shim plate on the bottom support
weldment is on the bottom side of the load cell.