Digi-Star RF DataLink Operators Manual User Manual
Page 31
Operators Manual
D3664
25
Reliability Meter
This meter will show how well the scale and the base radio is communicating. The Good
Data and Missed Data show how many times the base radio has received an “OK” message
from the scale. Excellent reliability would be over 95%. If you are dropping below into Good
refer to the front section about maximizing radio range.
Utilities
The utilities are used to repair or reset options used in Datalink software. Do not perform
any of the utility options unless instructed by a Digi-Star technician.
Load Database Changes – Use
this option when Digi-Star has
repaired
or
modified
your
Datalink software.
Export Defaults – This is used
to send a Digi-Star technician for
troubleshooting
or
when
installing on a different PC to
transfer the settings.