Digi-Star RF DataLink Operators Manual - Manual (Page 23)

Operators Manual
D3664 17
Operating the RF DataLink
Now send feedings to DataLink and start the process. DataLink will send feeding data to
the scale. and then press the (Recipe) key to send the data back to the PC. This will repeat
until the number of feeding are gone.
Importing the Feeding Data
To import the feeding data,
select Process from the main
menu of the RF Datalink
program. The program will
automatically read the feeding
data. A screen called Importing
Pen File will be displayed while
the feeding data is being read.
When
the file has been
completed, the Importing Pen
File box will be removed from
the screen. The second
window will now display the
Feeding Number, Ration, Zone,
Call
Weight, Millmix and
Externally Loaded amounts as
shown:
The Call Weight is the total
amount of that ration to be fed
for that feeding.
Millmix refers to the amount of that ration that is mixed at a mill.
Ex. Loaded is the amount of that
ration that will be loaded at the
Mixer.
If the RF Datalink program is
already running in the Process
mode,
the program will
automatically read any new
feeding data sent from third party
software. The RF Datalink
program
looks for feeding
updates between each
conversation with the EZ
Indicator.
Starting the Process
Once the feeding data has been
read into the RF DataLink
program, you can start the actual