Diamondback Fitness 510Ub - Manual (Page 25)

510Ub Owner’s Manual
25
PROGRAMMING FEATURES
Elapsed Time and Remaining Time Switching
While running a program, the Total Time and Segment Time values will switch between elapsed and remaining. The user may stop the
switching and display the current view by pressing the Right Arrow key. Pressing the key again will return the display to switching mode.
Workout Summary
For additional user feedback, the 510 console provides a brief Workout Summary immediately following the completion of the workout
session. “END” will post in the Matrix Display and total Time, Distance and Calorie values for the workout will be displayed for thirty (30)
seconds. The console will then return to the Idle screen.
CONSOLE SETUP
Console Default Settings
This unit is shipped with the default values appropriate for the U.S. market.
Setting Default/Factory Setting Available Settings
Units English or standard English, Metric
Model Will match the current unit model 510Er, 510Sr, 510Ub
Sound On On, Off
Backlight High High, Low
Demo Mode On On, Off
Console Setup Launch
If the user would like to update the default values and personalize one of the two custom user profiles, pressing the UP and DOWN arrows
keys simultaneously for two (2) seconds will launch the Console Setup mode.
Units Setup When the Console Setup mode is launched, “SET UNITS” will post in the lower display field. “Eng” or “Met” will
flash in the Matrix Display, depending upon current setting. Use the UP or DOWN arrow keys to scroll through the
available settings and press the ENTER key to select the displayed option. Press ENTER to launch the Model
Number Selections mode.