Setup mode, Setting midi channel – Diamond Amplification MAC-2 User Manual
Page 13
Setup Mode
Setup mode allows you to change how the MAC-2’s MIDI and
switching functions work. In most circumstances, you won’t need these
functions at all. If you have a complex MIDI setup, or an amplifier with
special switching requirements, setup mode will help you integrate the
MAC-2 into your rig.
Setting MIDI Channel
The MAC-2 responds to MIDI channel 1 by default. If you’d like to
change it to respond to a different channel, you can follow these steps:
1. Remove the power supply from the MAC-2
2. Hold down the Function 1 button and plug in the MAC-2’s
power supply
3. Keep holding the Function 1 button until the LEDs flash
You’re now able to select which MIDI channel the MAC-2 responds to.
Use the channel buttons to turn the channel LEDs on or off to get the
desired pattern shown below:
MIDI
Chan
Function 1
LED
Function 2
LED
Function 3
LED
Function 4
LED
1
OFF OFF OFF OFF
2
ON
OFF OFF OFF
3 OFF ON
OFF OFF
4
ON ON OFF OFF
5 OFF OFF ON
OFF
6
ON
OFF
ON
OFF
7 OFF ON ON OFF
8
ON ON ON OFF
9
OFF OFF OFF ON
10
ON
OFF OFF ON
11 OFF
ON
OFF
ON
12
ON ON OFF
ON
13 OFF OFF
ON ON
14
ON
OFF
ON ON
15 OFF
ON ON ON
16
ON ON ON ON
8