Bios setup south bridge configuration – DFI EL331-RM User Manual
Page 93

93
3
BIOS Setup
South Bridge Configuration
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions
[8 USB Ports]
USB Port Configure
[6x6 USB Ports]
GbE Controller
[Enabled]
GbE LAN Boot
[Disabled]
GbE Wake Up From S5
[Disabled]
GPIO9 Configuration
[WOL Enabled]
HDA Controller
[Enabled]
SMBUS Controller
[Enabled]
SLP_S4# Min. Assertion Width [4 to 5 seconds]
Chipset
Options
USB Functions
Selects the number of USB ports you want enabled.
USB Port Configure
The options are 6x6 USB Ports and 8x4 USB Ports.
GbE Controller
Enables or disables the Gigabit LAN controller.
GbE LAN Boot
Enable this field if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM’s settings, type the keys simultaneously
when prompted during boot-up. Take note: you will be able to access the boot
ROM’s program (by typing ) only when this field is enabled.
GbE Wake Up From S5
When enabled, it allows the system to wake up from S5 via the network LAN.