DFI CP337-NRM - Manual (Page 47)

47
2
Hardware Installation
FDD Connector
The FDD connector supports a standard floppy disk drive. The floppy cable can
be inserted into this connector only if pin 1 of the cable is aligned with pin 1 of
this connector.
Connecting the FDD Cable
Insert one end of the FDD cable into the FDD connector and the other end of
the cable to the floppy drive. Pin 1 of the cable must align with pin 1 of the FDD
connector.
BIOS Setting
Configure the onboard FDD in the Advanced menu (“Super IO Configuration” sub-
menu) of the BIOS. Refer to chapter 3 for more information.
2
1 33
34
1