DFI CP337-NRM - Manual (Page 10)

1
10
Introduction
Serial ATA
IDE
AMT
(-NRM only)
TPM (optional)
Rear Panel I/O
Ports
I/O Connector
• 6 Serial ATA ports compliant with SATA 1.0a specification
• SATA speed up to 3Gb/s (SATA 2.0)
• Integrated Advanced Host Controller Interface (AHCI) control-
ler
• Supports RAID 0/1/5/10
• JMicron JMB368 PCI Express to PATA host controller
• DMA mode: Ultra ATA up to 100MB/s
• PIO mode: up to 16MB/s
• Supports iAMT6.0
• Out-of-band system access
• Remote troubleshooting and recovery
• Hardware-based agent presence checking
• Proactive alerting
• Remote hardware and software asset tracking
• TPM - Trusted Platform Module
• Provides a Trusted PC for secure transactions
• Provides software license protection, enforcement and pass-
word protection
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 DB-9 RS232 serial ports
- Pins 1 and 9 of COM 2 functions as RS232 signal or power
(selectable via jumper)
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line out jacks
• 4 connectors for 8 external USB 2.0/1.1 ports
• 2 connectors for 2 external serial ports
- COM 3 supports RS232/422/485
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 8-bit Digital I/O connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in connector
• 1 S/PDIF connector
• 6 Serial ATA connectors
• 1 34-pin FDD connector
• 1 40-pin IDE connector
• 1 24-pin ATX power connector
• 1 front panel connector
• 3 fan connectors