Chapter 3, Chapter 3 bios setup – DFI HU171 User Manual
Page 49

www.dfi .com
49
Chapter 3 BIOS Setup
Chapter 3
System Agent (SA) Configuration
This section is used to configure the parameters of System Agent.
Check to enable VT-d
function on MCH.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
System Agent Bridge Name
System Agent RC Version
VT-d Capability
VT-d
Graphics Confi guration
Memory Confi guration
Haswell
1.7.0.0
Supported
[Enabled]
Chipset
VT-d
Enable the VT-d function on MCH.
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Graphics Configuration
This field configures the graphics settings.
Select DVMT 5.0 Pre-
Allocated (Fixed) Graph-
ics Memory size used
by the Internal Graphics
Device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency
DVMT Pre-Allocated
LCD Control
2179
400 MHz
[32M]
Chipset
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
DVMT Pre-Allocated
Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device. Please refer to the information below.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency
DVMT Pre-Allocated
LCD Control
2179
400 MHz
Chipset
DVMT Pre-Allocated
32M
64M
96M
128M
160M
192M
224M
256M
288M
320M
352M
384M
416M
448M
480M
512M
1024M
Select DVMT5.0 Pre-
Allocated (Fixed) Graph-
ics Memory size used
by the Internal Graphics
Device.
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit