DFI ES121-LR - Manual (Page 80)

80
7
BIOS Setup
Hardware Health Configuration
This section is used to configure the hardware monitor function.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Health Configuration
System Temperature
CPU Temperature
System Fan Speed
CPU Fan Speed
Vcore
+5(V)
+1.05(V)
+1.8(V)
+12V
3VSB (V)
VBAT (V)
Case Open Detection
CPU Fan Mode Setting
CPU FAN PWM Control
Advanced
:48 o C/118 o F
:60 o C/140 o F
:NA
:NA
:1.120 V
:4.889 V
:1.064V
:1.840 V
:12.091 V
:3.360 V
:3.120 V
[Disabled]
[Manual Mode]
[255]
System Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage of the
monitored devices or components.
Case Open Detection
Set this field to Enabled to allow the system to alert you of a chassis intru-
sion event.
CPU Fan Mode Setting
Selects the CPU fan’s mode. The options are Manual Mode and Thermal
Cruise Mode.
CPU Fan PWM Control
This is the PWM’s duty cycle control. Enter the CPU fan’s speed in this field.
The higher the value, the faster the CPU fan’s speed.
Enabled for Case Open
Detection. If Case is
open, system will show
warning message and beep
warning.