DFI ES121-LR - Manual (Page 78)

78
7
BIOS Setup
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Allows BIOS to select
Serial Port 1 Base
Addresses.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Super IO Chipset
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
PWRON After PWR-Fail
W83627DHG.WDT Time
Advanced
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[Off]
[000]
Serial Port1 Address and Serial Port2 Address
Auto
Automatically selects a base address for the COM port.
3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4
Selects the COM port’s base address.
Disabled
Disables the COM port.
Serial Port2 Mode
COM port functions as a serial port or IrDA. You cannot use both at the same
time.
Normal
Sets the COM port to serial port mode.
IrDA
Sets the COM port to IrDA mode.
ASK IR
Sets the COM port to ASK IR mode.